Electrolube SGB Grease, Contact Treatment Grease, 1Kg

SGB (2X Grease) was developed as an extension of the No 2 Range (SGA and SOA) with increased plastics compatibility. This product development was necessary due to the use of thermoplastics in the electronics and automotive industries. SGB will significantly increase contact performance and lifetime.
Separate data sheets are available for the diluted oil (EML), oil (SOB) and the low penetration grease (SGBH).
1Kg Bulk can

Improves contact performance by increasing effective contact area
Enhanced plastics compatibility; suitable for a range of plastics and rubbers (testing advised)
Highly stable synthetic material, fully inhibited against oxidisation and copper corrosion
Excellent penetration and cooling properties; prevents arcing, thus reduces contact wear

Size: 35ml syringe.
RoHS-2 Compliant (2011/65/EU): Yes
Colour: Beige
Density: (g/ml) 1.11
Temperature Range (°C): -35 to +130
Vapour Pressure: 0.001 Torr @ 20°C
Evaporation Weight Loss (% 7 days @ 100°C): 3.73
Evaporation Weight Loss (% 7 days @ 125°C): 3.90
Copper Strip Corrosion (IP154 / ISO 2160): =1b
Drop Point (IP32 / ISO 2176 (°C)): 250
Cone Penetration Worked (ASTM D217, 60 strokes @ 20°C): 320
Cone Penetration Un-worked (ASTM D 217 @ 20°C): 310
Cone Penetration Un-worked (ASTM D 217 @ -40°C): 180
Consistency (NLGI): 1
Fliessdruck (Flow Pressure) (DIN 51805, mbar @ -40°C): 720
Oil Bleed / Separation (IP121): 6%
Silver Corrosion (DIN 51759, 3 hrs @100°C): No Change
Plastic Compatibility - ABS: Test
Plastic Compatibility - PC: Test
Thickener: Clay
Water Content (%): 0.6
UV Trace: No

SGB